Once your team of builders is done with the construction of your new home, it is now time for inspection. Usually, when the construction is finished, your builder will first contact a local inspector in the community to check the house before they let you conduct your own inspection. However, you have to remember that the local inspector only checks defects that may violate the building codes set in your community. They do not check the patent defects that may be present in your new home. Thus, there is a need for you to look for these defects in your new construction home inspection.
Knowing what to look for in a new construction home is very important so that you will not be stressed or have any problems moving in. Bear in mind that the more detailed you are with your inspection, the safer it is for you to move into your new home. Here are some necessary things to look out for once you start with your own inspection.
Start with the Obvious in New Construction Home Inspection
When looking for defects in a new construction home inspection, it is easier if you start with the obvious. This means looking at the doors, windows, walls, floors, and ceilings. When checking out the door, make sure to open each and every one of them to the fullest. See if they open and close smoothly. Also, check all doors are painted from top to bottom and its sides. See that the threshold under each of the doors has no space.
The same goes for the windows. However, in the case of windows, it is a must that you must also check if there are air leaks. You can do this by lighting a lighter or a match and holding it around all of its edges. Once it flickers, then the part where it flickered must have an air leak. Aside from this, you also have to look for the hinges of each window. You do not want to be irritated with a creaking hinges every time you open and close it. Another thing to be noted when checking the windows are the screen installed in each of them. Make sure that they are installed correctly and without space in their edges. Also, you have to look if there are any holes larger than it is supposed to be or any tears in the screen. Being very meticulous in looking for defects in new construction, a home inspection will be very helpful in this case.
In terms of ceilings, floors, and wall inspection, smoothness must be the first word to come into your mind. Check if there are any dents, chips, gaps, or cracks. See if there are protruding nail heads. A hawk’s eye is a very good asset in this one. Moreover, in checking the walls, you have to look if there are any visible seams. While in floors and ceilings, you have to see if there are any moldings. If your flooring is made of tiles, hardwood, or linoleum, what to look for are scuff marks. Also, scan if the colors of the paint, as well as the varnish, are correct. In rooms where there are installed carpets, make sure of its fitting. Make sure that there are no loose fitting at each of the edges. If you are going to look for defects in new construction home inspection, you have to be prepared to scrutinize every nooks and cranny of your house. This will greatly benefit you in the end.
Time for a More Complex New Construction Home Inspection
Once done with the easy part, it is now time for you to a more complex new construction home inspection. In this part, your checklist must include the electrical, heating as well as cooling defects, plumbing, and other mechanical aspects of your home. This is the part where you must familiarize yourself with how your home works.
When checking for electrical defects in a new construction home inspection, you have to see if all the installed appliances are working as they should be. See if the outlets are working by trying them with your appliances. Switch the light on and off in each of the rooms. If there is some light which is remote controlled, know how it works. In addition to this, you also have to check each of the light fixtures. See that each and every one of them is fully and correctly installed. Also, check if there are any broken parts in each fixture.
At this point, you also have to check the heating and cooling system in your house. Take time in scrutinizing this part since this generally concerns your home’s comfort and your family’s health. Start by turning on the heater and listening if there are any suspicious or irritating sounds that it creates. Next is for you to feel if the vents are really releasing air. Touch the convectors or the radiators. Feel if they are warm after a few minutes from turning them on. The same tip goes for testing the air conditioning. Of course, the difference is when you are going to check the thermostat. In the case of your heating system, try turning your thermostat five degrees higher than the room temperature. Do the reverse in your cooling system. You have to turn it five degrees lower than the room temperature. This is how fussy you should be when you look for defects in your new construction home inspection.
Plumbing is also one of the most important things that you must add in your new construction home inspection since it mainly concerns the water of your house. This is where you will check the bathrooms, kitchens, and other parts of your house that has a plumbing system. Check each and every faucet if they are working properly. Look at the fixtures and run it every five minutes to see if there are any leaks or drips. In your bathrooms, see if the showers, sinks, toilets, and bathtubs are working correctly. Turn the shower on and off. In the case of the bathtubs, try closing the sink stopper and add a few inches of water in it. You have to wait for at least three minutes before opening the stopper to drain the water. This is for you to be sure that there no leaks in it. Flush every bathroom toilet and check each base if there are any leaks.
It is best for you to prepare a checklist before you look for defects in your new construction home inspection. Just to be sure that you do not miss anything of importance to your health, safety, and needs once you move into your home sweet home.